All Alternatives

Alternatives to Analog Devices ADA4627-1ARZ

Analog Devices ADA4627-1ARZ and its qualified second sources, compared on form/fit/function, stock, lifecycle and price — the same checks Parter runs inside a BOM.

ADA4627-1ARZ compared against its qualified second sources
ADA4627-1ARZAnalog DevicesOPA828IDRTexas InstrumentsOPA627AUTexas Instruments+3more
FFF CompatibilityPins 1 and 5 are NC (No Connect) on the OPA828, whereas they were used for Offset Null adjustment on the original ADA4627-1. If the system design leaves these trim pins floating, it is a direct drop-in.Both parts use the standard 8-pin SOIC surface-mount package (0.154" / 3.90mm width) with identical physical dimensions.Exceeds all key electrical performance parameters including supply voltage limit (36 V max vs 30 V max), noise, offset voltage, and speed.Pins 1 and 5 are NC (No Connect) on the OPA627 SOIC package, whereas they were used for Offset Null on the ADA4627-1. Compatible if offset null pins are unused.Both parts use the standard 8-pin SOIC surface-mount package footprint.Matches the JFET input topology, precision DC offset (130 µV vs 120 µV), and excellent noise parameters.
AI Summary

ADA4627-1ARZ by Analog Devices: J-FET Amplifier 1 Circuit 8-SOIC.

The OPA828 represents the next-generation upgrade for high-performance JFET input amplifiers. It provides significantly improved AC speed and DC precision in an active, long-term supported component.

  • Higher bandwidth: 45 MHz vs 19 MHz
  • Much faster slew rate: 150 V/µs vs 84 V/µs
  • Superior DC precision: 50 µV typical input offset vs 120 µV
  • Pins 1 and 5 cannot be used for external offset trimming if required by the application.

The OPA627 is a highly-regarded, active industrial standard for precision JFET applications. It maintains the required high-voltage rails and low distortion profiles of the original.

  • Legendary low-distortion audio and instrumentation performance
  • Comparable bandwidth and slew rate (16 MHz and 55 V/µs)
  • High voltage capability up to 36 V (vs 30 V)
  • Slightly lower slew rate (55 V/µs vs 84 V/µs) and bandwidth (16 MHz vs 19 MHz).
  • Significantly higher cost per unit compared to modern alternatives.
Lifecycle StatusObsoleteActiveActive
Market AvailabilityNon-stockIn stockIn stock
REACHREACHREACHREACH
RoHSRoHSRoHSRoHS
DescriptionJ-FET Amplifier 1 Circuit 8-SOICJ-FET Amplifier 1 Circuit 8-SOICStandard (General Purpose) Amplifier 1 Circuit 8-SOIC
ManufacturerAnalog DevicesTexas InstrumentsTexas Instruments
TypeLinearLinearLinear
DatasheetOpenOpenOpen
Lead Time42 weeks9 weeks26 weeks
Country of OriginPH--
Export Control Class NumberEAR99EAR99EAR99
HTSUS Code8542.33.0001--
Moisture Sensitivity Level1 (Unlimited)--
Slew Rate84V/µs--
Mounting TypeSurface Mount--
Amplifier TypeJ-FET--
Package / Case8-SOIC (0.154", 3.90mm Width)--
Current - Supply7mA--
Number of Circuits1--
Current - Input Bias1 pA--
Operating Temperature-40°C ~ 125°C--

Unlock all 5 alternatives

  • Find & compare verified second sources
  • Spot risk early with real-time part monitoring
  • Stay compliant and production-ready

You searched one part. Parter watches your whole BOM.

  1. All your BOM, at once

    Parter maps every line to live stock, lead time, lifecycle and compliance data across the entire market — not part by part.

  2. Hear about problems before they hit production

    Allocation, EOL and last-time-buy notices surface the moment they appear, not when your buyer's PO bounces.

  3. Qualified replacements in minutes, not days

    Every at-risk line gets form-fit-function matches like the ones above — deltas flagged, evidence attached. Review, push to your BOM, and Parter starts watching the new part too.

Frequently asked questions

Yes. The Analog Devices ADA4627-1ARZ is marked obsolete, so the manufacturer has discontinued it and any remaining supply is limited to distributor stock. The qualified second sources on this page are active parts you can design in today.

Schedule a demo

See Parter in action

Discover how Parter can help your hardware team:

  • Streamline your hardware operations with AI
  • Detect and prevent lifecycle disruptions
  • Accelerate product development
  • Stay compliant and production-ready