All Alternatives

Alternatives to Diodes Incorporated AP7370-33FDC-7

Diodes Incorporated AP7370-33FDC-7 and its qualified second sources, compared on form/fit/function, stock, lifecycle and price — the same checks Parter runs inside a BOM.

AP7370-33FDC-7 compared against its qualified second sources
AP7370-33FDC-7Diodes IncorporatedAP7375-33FDCWR-7RDiodes IncorporatedAP7383-33FDC-7Diodes Incorporated
FFF CompatibilityPin 4 is an EN (Enable) pin instead of NC (Not Connected); it must be tied high to enable the regulator and cannot be left floating, which may require a PCB layout check or modification.Matches the physical U-DFN2020-6 package size and mounting style.Meets the 3.3V fixed output and 300mA current requirements while exceeding the input voltage rating.Features the exact same pin assignments (Pin 1: VOUT, Pin 3: GND, Pin 6: VIN, with Pins 2, 4, 5 as NC) and footprint as the target part.Same U-DFN2020-6 (Type C) physical dimensions and land pattern.Provides only 150mA maximum output current compared to the original part's 300mA.
AI Summary

AP7370-33FDC-7 by Diodes Incorporated: Linear Voltage Regulator IC Positive Fixed 1 Output 300mA U-DFN2020-6 (Type C).

This is the official manufacturer-recommended replacement for the obsolete AP7370-33FDC-7. It matches the 300mA output capability and 3.3V fixed voltage, but introduces an EN pin on Pin 4 which was previously NC, requiring verification of the board layout.

  • Direct manufacturer-recommended substitute with matching 300mA current capacity
  • Significantly higher input voltage ceiling (45V vs 18V) for enhanced safety margin
  • Lower dropout voltage (0.36V @ 100mA vs 0.6V @ 100mA) improving efficiency
  • Requires pin 4 (EN) to be driven high (or tied to VIN) to function, as leaving it floating or grounded will disable the regulator.

This alternative is a true pin-to-pin drop-in replacement that requires zero PCB modification because it omits the Enable pin (leaving Pins 2, 4, and 5 as NC). However, it is limited to a 150mA maximum load, making it suitable only if the system's actual current draw does not exceed this threshold.

  • True drop-in pin compatibility with no Enable pin required, meaning no circuit redesign is necessary if load current is within limits
  • Higher input voltage rating (30V vs 18V) providing extra electrical head room
  • Low quiescent current of 3 µA, matching the ultra-low power profile of the original series
  • Reduced maximum output current capacity (150mA vs 300mA), which may trigger overcurrent protection if the design pulls more than 150mA.
Lifecycle StatusObsoleteActiveActive
Market AvailabilityNon-stockIn stockIn stock
REACHREACHREACHREACH
RoHSRoHSRoHSRoHS
DescriptionLinear Voltage Regulator IC Positive Fixed 1 Output 300mA U-DFN2020-6 (Type C)Linear Voltage Regulator IC Positive Fixed 1 Output 300mA U-DFN2020-6 (SWP) (Type UXC)Linear Voltage Regulator IC Positive Fixed 1 Output 150mA U-DFN2020-6 (Type C)
ManufacturerDiodes IncorporatedDiodes IncorporatedDiodes Incorporated
TypePower Management (PMIC)Power Management (PMIC)Power Management (PMIC)
DatasheetOpenOpenOpen
Lead Time9 weeks40 weeks12 weeks
Country of OriginCN, US--
Export Control Class NumberEAR99EAR99EAR99
HTSUS Code8542.39.0090--
Moisture Sensitivity Level1 (Unlimited)--
Output TypeFixed--
Mounting TypeSurface Mount--
Package / Case6-UDFN Exposed Pad--
Current - Output300mA--
Protection FeaturesOver Current, Over Temperature, Reverse Current, Short Circuit--
Number of Regulators1--
Output ConfigurationPositive--
Operating Temperature-40°C ~ 125°C (TJ)--

Unlock all 2 alternatives

  • Find & compare verified second sources
  • Spot risk early with real-time part monitoring
  • Stay compliant and production-ready

You searched one part. Parter watches your whole BOM.

  1. All your BOM, at once

    Parter maps every line to live stock, lead time, lifecycle and compliance data across the entire market — not part by part.

  2. Hear about problems before they hit production

    Allocation, EOL and last-time-buy notices surface the moment they appear, not when your buyer's PO bounces.

  3. Qualified replacements in minutes, not days

    Every at-risk line gets form-fit-function matches like the ones above — deltas flagged, evidence attached. Review, push to your BOM, and Parter starts watching the new part too.

Frequently asked questions

Yes. The Diodes Incorporated AP7370-33FDC-7 is marked obsolete, so the manufacturer has discontinued it and any remaining supply is limited to distributor stock. The qualified second sources on this page are active parts you can design in today.

Schedule a demo

See Parter in action

Discover how Parter can help your hardware team:

  • Streamline your hardware operations with AI
  • Detect and prevent lifecycle disruptions
  • Accelerate product development
  • Stay compliant and production-ready