All Alternatives

Alternatives to Renesas Electronics Corporation EL7232CSZ

Renesas Electronics Corporation EL7232CSZ and its qualified second sources, compared on form/fit/function, stock, lifecycle and price — the same checks Parter runs inside a BOM.

EL7232CSZ compared against its qualified second sources
EL7232CSZRenesas Electronics CorporationMCP14E5-E/SNMicrochip TechnologyUCC27523DRTexas Instruments
FFF CompatibilityPinout assignments are completely different. Pin 3 on the MCP14E5 is GND (was 3-STATE B on the EL7232), and Pin 5 is OUT B (was GND on the EL7232). A full board layout redesign is required.Housed in a standard 8-pin SOIC package, matching the original component's physical package type, footprint, and surface-mount style.While it matches the dual-inverting logic and exceeds drive current/supply voltage limits, the disable state pulls the output LOW instead of putting it into high-impedance (3-state) mode.Pinout assignments do not match. Pin 3 is Ground (was 3-STATE B on the EL7232) and Pin 5 is OUT B (was Ground on the EL7232), which requires a complete PCB redesign.Available in a standard 8-pin SOIC package with the same footprint and pitch, allowing it to fit the same physical area.Provides excellent electrical ratings but lacks true 3-state high-impedance output behavior; disabling the channels holds the outputs LOW.
AI Summary

EL7232CSZ by Renesas Electronics Corporation: 2/0 Driver 8-SOIC.

The MCP14E5-E/SN is an active dual-channel inverting driver with dual independent enable pins. It offers stronger drive current (4.0A vs. 2.0A) and a slightly higher supply voltage ceiling (18V vs. 16V). However, because the disable state pulls the output low rather than tri-stating it, this part is only a functional equivalent if the application does not rely on the high-impedance 3-state output behavior.

  • Dual inverting driver channels match the logic polarity of the original part
  • High-peak output current of 4.0A (vs. 2.0A of the original) provides stronger driving capability
  • Wide supply voltage range of 4.5V to 18V fully covers the original 4.5V to 16V range
  • Output is pulled LOW when disabled, rather than transitioning to High-Impedance (3-state) like the original
  • Completely different pinout requires a PCB layout redesign

The UCC27523DR is a premium, active dual-channel low-side inverting gate driver from Texas Instruments. It features faster switching and higher peak drive current (5.0A vs. 2.0A) over a wider supply range of up to 18V. Since the enable pin forces a LOW output rather than a tri-state high-impedance state, the design must be evaluated for bus contention risks if the original's 3-state capability was active.

  • Dual inverting driver channels match the logic polarity of the original part
  • Strong peak output current of 5.0A (vs. 2.0A of the original) for driving heavy capacitive loads
  • Higher operating supply voltage of up to 18V (vs. 16V maximum on the original)
  • Does not support true high-impedance (3-state) outputs; outputs pull low when disabled
  • Requires a full PCB layout change due to incompatible pin assignments
Lifecycle StatusObsoleteUnknownUnknown
Market AvailabilityIn stockUnknownUnknown
REACHREACHUnknownUnknown
RoHSRoHSUnknownUnknown
Description2/0 Driver 8-SOICThe MCP14E5-E/SN is an active dual-channel inverting driver with dual independent enable pins. It offers stronger drive current (4.0A vs. 2.The UCC27523DR is a premium, active dual-channel low-side inverting gate driver from Texas Instruments. It features faster switching and hig
ManufacturerRenesas Electronics CorporationMicrochip TechnologyTexas Instruments
TypeInterfaceComponentComponent
DatasheetOpenN/AN/A
Lead Time19 weeksUnknownUnknown
Country of OriginMY, US, PH, JP--
Export Control Class NumberEAR99EAR99EAR99
HTSUS Code8542.39.0070--
Moisture Sensitivity Level3 (168 Hours)--
TypeDriver--
Mounting TypeSurface Mount--
Package / Case8-SOIC (0.154", 3.90mm Width)--
Voltage - Supply4.5V ~ 16V--
Operating Temperature-40°C ~ 85°C--
Supplier Device Package8-SOIC--
Number of Drivers/Receivers2/0--

Unlock all 2 alternatives

  • Find & compare verified second sources
  • Spot risk early with real-time part monitoring
  • Stay compliant and production-ready

Related parts

PartMarket availabilityLifecycleAlternatives available
EL7242CSZRenesas Electronics CorporationIn stockObsolete5Alternatives availableSee Alternatives
EL7232CSZ-T13Renesas Electronics CorporationNon-stockActive3Alternatives availableSee Alternatives
EL7242CNZRenesas Electronics CorporationDiscontinuedObsolete3Alternatives availableSee Alternatives

You searched one part. Parter watches your whole BOM.

  1. All your BOM, at once

    Parter maps every line to live stock, lead time, lifecycle and compliance data across the entire market — not part by part.

  2. Hear about problems before they hit production

    Allocation, EOL and last-time-buy notices surface the moment they appear, not when your buyer's PO bounces.

  3. Qualified replacements in minutes, not days

    Every at-risk line gets form-fit-function matches like the ones above — deltas flagged, evidence attached. Review, push to your BOM, and Parter starts watching the new part too.

Frequently asked questions

Yes. The Renesas Electronics Corporation EL7232CSZ is marked obsolete, so the manufacturer has discontinued it and any remaining supply is limited to distributor stock. The qualified second sources on this page are active parts you can design in today.

Schedule a demo

See Parter in action

Discover how Parter can help your hardware team:

  • Streamline your hardware operations with AI
  • Detect and prevent lifecycle disruptions
  • Accelerate product development
  • Stay compliant and production-ready