Alternatives to Texas Instruments ISO1050DUBR
Texas Instruments ISO1050DUBR and its qualified second sources, compared on form/fit/function, stock, lifecycle and price — the same checks Parter runs inside a BOM.
 ISO1050DUBRTexas Instruments | NSI1050-DDBRNOVOSENSE | TPT71050-SM1R3PEAK | +2more | |
|---|---|---|---|---|
| FFF Compatibility | The pinout is 100% identical (Pin 2 is RXD, Pin 3 is TXD, Pin 1 is VCC1, Pin 8 is VCC2, etc.) and it mounts directly onto the existing DUB-8 layout.It uses the identical wide SOP-8 (DUB-8) package style with standard 2.54mm lead pitch and physical outline.Fully compatible with the ISO11898-2 standard supporting up to 1Mbps data rates with enhanced ±40V bus fault protection. | The physical package footprint has a different pitch and body width, requiring a layout redesign.It is an 8-pin wide isolated package style but possesses minor dimensional and pitch differences from the DUB package.It meets or exceeds all electrical parameters of the ISO1050, adding support for the faster CAN FD standard. | ||
 AI Summary | ISO1050DUBR by Texas Instruments: 1/1 Transceiver, Isolated Half CANbus 8-SOP. | The NSI1050-DDBR is a highly reliable, direct pin-to-pin second-source replacement for the ISO1050DUBR. It offers identical physical package dimensions and pin mapping while improving common-mode transient immunity (CMTI) to 100 kV/μs. This is the easiest drop-in alternative requiring zero schematic or PCB layout modifications.
| The TPT71050-SM1R is an upgraded isolated CAN transceiver from 3PEAK that maintains the same pinout mapping logic (RXD on Pin 2, TXD on Pin 3) as the ISO1050. It upgrades the bus data rate to 5 Mbps for CAN FD systems and increases common-mode transient immunity. Redesigning the PCB footprint is necessary because the SMP8 package footprint pitch differs from the DUB package.
| |
| Lifecycle Status | Active | Unknown | Unknown | |
| Market Availability | In stock | Unknown | Unknown | |
| REACH | REACH | Unknown | Unknown | |
| RoHS | RoHS | Unknown | Unknown | |
| Description | 1/1 Transceiver, Isolated Half CANbus 8-SOP | The NSI1050-DDBR is a highly reliable, direct pin-to-pin second-source replacement for the ISO1050DUBR. It offers identical physical package | The TPT71050-SM1R is an upgraded isolated CAN transceiver from 3PEAK that maintains the same pinout mapping logic (RXD on Pin 2, TXD on Pin | |
| Manufacturer | Texas Instruments | NOVOSENSE | 3PEAK | |
| Type | Interface | Component | Component | |
| Datasheet | Open | N/A | N/A | |
| Lead Time | 16 weeks | Unknown | Unknown | |
| Country of Origin | MY, US, TH | - | - | |
| Export Control Class Number | 5A991B1 | EAR99 | EAR99 | |
| HTSUS Code | 8542.39.0070 | - | - | |
| Moisture Sensitivity Level | 3 (168 Hours) | - | - | |
| Type | Transceiver, Isolated | - | - | |
| Duplex | Half | - | - | |
| Protocol | CANbus | - | - | |
| Data Rate | 1Mbps | - | - | |
| Mounting Type | Surface Mount | - | - | |
| Package / Case | 8-SMD, Gull Wing | - | - | |
| Voltage - Supply | 3V ~ 5.5V, 4.75V ~ 5.25V | - | - | |
| Receiver Hysteresis | 150 mV | - | - |
Unlock all 4 alternatives
- Find & compare verified second sources
- Spot risk early with real-time part monitoring
- Stay compliant and production-ready
Related parts
| Part | Market availability | Lifecycle | Alternatives available |
|---|---|---|---|
 ISO1050DUBTexas Instruments | In stock | Obsolete | 5Alternatives availableSee Alternatives |
 ISO1540DTexas Instruments | Discontinued | Obsolete | 5Alternatives availableSee Alternatives |
| ISO7220ADRTexas Instruments | In stock | Active | 5Alternatives availableSee Alternatives |
 ISO124UTexas Instruments | Non-stock | Active | 3Alternatives availableSee Alternatives |
 ISO5852SDWRTexas Instruments | In stock | Active | 6Alternatives availableSee Alternatives |
You searched one part. Parter watches your whole BOM.
All your BOM, at once
Parter maps every line to live stock, lead time, lifecycle and compliance data across the entire market — not part by part.
Hear about problems before they hit production
Allocation, EOL and last-time-buy notices surface the moment they appear, not when your buyer's PO bounces.
Qualified replacements in minutes, not days
Every at-risk line gets form-fit-function matches like the ones above — deltas flagged, evidence attached. Review, push to your BOM, and Parter starts watching the new part too.
Frequently asked questions
Yes. The Texas Instruments ISO1050DUBR is active and in production. The parts listed here are qualified equivalents if you need a second source or better availability.
The closest qualified second sources for the Texas Instruments ISO1050DUBR are the NSI1050-DDBR (NOVOSENSE) and the TPT71050-SM1R (3PEAK), out of 4 matched alternatives in total. Each is compared against the original on fit, form and function in the table above.
Not always. The alternatives to the ISO1050DUBR are matched on function but can differ in package, pinout or a key parameter, so review the fit/form/function notes in the table and the datasheet before designing one in.
The ISO1050DUBR (Texas Instruments) is a part in the Interface category. This page lists qualified, cross-referenced replacements for it with a side-by-side comparison.
Schedule a demo
See Parter in action
Discover how Parter can help your hardware team:
- Streamline your hardware operations with AI
- Detect and prevent lifecycle disruptions
- Accelerate product development
- Stay compliant and production-ready