All Alternatives

Alternatives to onsemi FAN2559MP15X

onsemi FAN2559MP15X and its qualified second sources, compared on form/fit/function, stock, lifecycle and price — the same checks Parter runs inside a BOM.

FAN2559MP15X compared against its qualified second sources
FAN2559MP15XonsemiFAN2558MP15XonsemiLP5912-1.5DRVRTexas Instruments+1more
FFF CompatibilityNearly identical pinout, except Pin 2 is No Connect (NC) instead of Noise Bypass (BYP). The bypass capacitor on the board will simply float.Housed in the exact same 2mm x 2mm 6-Lead MLP (DFN) package with identical land pattern.Shares the same 1.5V fixed output voltage, 180mA current rating, input voltage range, and control features.Highly compatible pin assignment; Pin 2 is No Connect (NC) instead of Noise Bypass (BYP), meaning the existing board capacitor will safely float.Housed in an equivalent 2mm x 2mm 6-WSON package that matches the physical footprint.Matches the 1.5V fixed output and comfortably exceeds the 180mA current ceiling with a 500mA rating.
AI Summary

FAN2559MP15X by onsemi: Linear Voltage Regulator IC Positive Fixed 1 Output 180mA 6-DFN (2x2).

This is the official manufacturer-recommended substitute from the same family and datasheet. It operates with the same physical footprint and electrical ratings, with the only design change being that the noise bypass capacitor at Pin 2 becomes unused.

  • Manufacturer recommended substitute
  • Identical 6-DFN (2x2) physical footprint and dimensions
  • Shares the exact same electrical characteristics (1.5V, 180mA LDO)
  • Slightly higher output noise because the reference noise bypass capacitor (BYP) pin is not internally connected in the FAN2558 series
  • Part is also obsolete, though extensively available from authorized aftermarket stock (e.g. Rochester Electronics)

An excellent, active replacement that is nearly drop-in compatible. It preserves the exact control pin configuration (Enable and Power Good) while upgrading the output current capacity to 500mA and offering superior noise performance without requiring a bypass pin.

  • Active, in-production modern part from Texas Instruments
  • Highly compatible pin layout matching the original EN, PG, GND, IN, and OUT pins
  • Upgraded output current of 500mA versus the original 180mA
  • Slightly higher quiescent current (55 uA vs 150 uA typical under full load, though standby is comparable)
Lifecycle StatusObsoleteObsoleteUnknown
Market AvailabilityDiscontinuedIn stockUnknown
REACHREACHREACHUnknown
RoHSRoHSRoHSUnknown
DescriptionLinear Voltage Regulator IC Positive Fixed 1 Output 180mA 6-DFN (2x2)Linear Voltage Regulator IC Positive Fixed 1 Output 180mA 6-DFN (2x2)An excellent, active replacement that is nearly drop-in compatible. It preserves the exact control pin configuration (Enable and Power Good)
ManufactureronsemionsemiTexas Instruments
TypePower Management (PMIC)Power Management (PMIC)Component
DatasheetOpenOpenN/A
Lead Time4 weeks99 weeksUnknown
Country of Origin---
Export Control Class NumberEAR99EAR99EAR99
HTSUS Code8542.39.0090--
Moisture Sensitivity Level1 (Unlimited)--
PSRR50dB (100kHz)--
Output TypeFixed--
Mounting TypeSurface Mount--
Package / Case6-VDFN Exposed Pad--
Control FeaturesEnable, Power Good--
Current - Output180mA--
Protection FeaturesOver Current, Over Temperature--
Number of Regulators1--

Unlock all 3 alternatives

  • Find & compare verified second sources
  • Spot risk early with real-time part monitoring
  • Stay compliant and production-ready

Related parts

PartMarket availabilityLifecycleAlternatives available
FAN1589MXonsemiDiscontinuedObsolete3Alternatives availableSee Alternatives
FAN1587AD15XonsemiIn stockObsolete6Alternatives availableSee Alternatives
FAN5063MonsemiIn stockObsolete3Alternatives availableSee Alternatives
FAN5071MonsemiDiscontinuedObsolete3Alternatives availableSee Alternatives

You searched one part. Parter watches your whole BOM.

  1. All your BOM, at once

    Parter maps every line to live stock, lead time, lifecycle and compliance data across the entire market — not part by part.

  2. Hear about problems before they hit production

    Allocation, EOL and last-time-buy notices surface the moment they appear, not when your buyer's PO bounces.

  3. Qualified replacements in minutes, not days

    Every at-risk line gets form-fit-function matches like the ones above — deltas flagged, evidence attached. Review, push to your BOM, and Parter starts watching the new part too.

Frequently asked questions

Yes. The onsemi FAN2559MP15X is marked obsolete, so the manufacturer has discontinued it and any remaining supply is limited to distributor stock. The qualified second sources on this page are active parts you can design in today.

Schedule a demo

See Parter in action

Discover how Parter can help your hardware team:

  • Streamline your hardware operations with AI
  • Detect and prevent lifecycle disruptions
  • Accelerate product development
  • Stay compliant and production-ready